Jump to content

Recommended Posts

New to Downriggers

I live in Fonthill about 20 minutes north of Port Colborne, Ontario, my boat is docked at Sugarloaf Marina in Port Colborne. I've been fishing for 67 years and consider myself a fairly decent fisherman when casting, trolling or jigging for walleye on small lakes and rivers. Last August my wife and I sold our cottage on Rice Lake, after an 18 year layoff I've returned to fishing Lake Erie. I must be doing something wrong because I'm not having much success with downriggers. My boat has 2 cannon downriggers, I usually have one set 10 - 15 feet from the bottom and the other at the halfway mark with worm harnesses on both. I usually fish within a mile or two of the weather buoy. My boat came equipped with a Hummingbird 175, it's next to useless, it rarely picks up fish in deep water. I'll probably upgrade to a better unit during the winter. I've been trailing my worm harness about 50 -60 feet behind my cannonball. I also changed to Walker releases because I was dragging fish around using the Cannon releases. Does anyone have any suggestions?

Link to comment
Share on other sites

Try Chamberlain releases.  They have a separate adjustment for small fish and light hitting walleye, but can be set to have a heavy load to the rod. Work just as good on Lake Ontario for big hard hittin fish. I've used Roemers and  Blacks in my past and Chamberlains are the best. They make a stacker version also. I have one to try but normally don't stack rods because of 3 rod limit per man.  Down riggers are working great this time of year. 

  • Like 1
Link to comment
Share on other sites

One thing you have to remember is that if your downrigger is set at whatever depth you're fishing at, you're probably nowhere near the bottom. For example, if your downrigger is 70 feet down, but you're trolling with the cable at a 45 degree angle, then you're probably only in 50 feet of depth. This August, fish have been hugging the bottom in 70 feet of water, I'll set my downrigger at 85 feet and still not be touching bottom. It seems like most hits are coming by popping the release and allowing the bait to flutter up. I use Dubro releases, I can't get any of the pinch-pad types to work. 

 

  • Like 1
Link to comment
Share on other sites

Dubro is exactly the same as Blacks.  They can't hold a candle to a Chamberlain. Yes they cost more, but ask yourself how valuable is your time. Buy one Dubro and one Chamberlain. The Dubro will soon be unused in your tackle box and you will have just wasted 1/2 the cost of your second Chamberlain. I have 2 Blacks and 3 Roemerers which I never use anymore.

  • Like 1
Link to comment
Share on other sites

I had 12 lb torpedos on my big jon electrics and they were so slow on retrieve that I sold them and went to 10 pound pancakes. So if you have manuals or newer cannons, 12's will work great. If you have electric down riggers, you need to have big enough motors to lift them. Initially with my pancakes I had cables crossing a couple times due to currents. Then I bent the tails to get the pancakes to run away from the boat and problem solved but you need to make sure you attach the correct pancake to the correct down rigger. I have one painted green and one painted black so I don't mix them up. Bought mine at Cabelas. I also run a  su b troll temp and speed sensor on one rigger which will increase blow back on that side and may have contributed to cables crossing.

Link to comment
Share on other sites

You must be logged in to view content

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...