Jump to content

mr 580

Members
  • Posts

    201
  • Joined

  • Last visited

Everything posted by mr 580

  1. 9/15- Price updated and lowered to $12,800 w/o kicker and Minn Kota Terrova. If boat not sold this fall, price will go up in spring. Open to reasonable offers. Boat is available for inspection.
  2. 9/2 Price Update- added Price without Minn Kota Terrova I pilot and Yamaha 8hp would be $13,800. Open to Reasonable Offers.
  3. 1999 Lund Pro V 1775 Tournament Series Tiller Walleye boat with 1999 Yamaha P60 60 hp two stroke, Humminbird 859ciHD GPS/Fishfinder, 2 live wells 2 bait wells, 48" and 6" tracks on each side, VHF marine radio, Shorelander roller trailer, custom Sunbrella travel cover, spare prop, spare seat and misc other spares. Boat is 2 nd owner garage/lift kept boat- has been used as a guide boat last 5 years and has had annual Public Vessel inspection each year. Reason for sale - updating to new larger Lund. Located Ashville, NY (Chautauqua Lake). Price $12,800 as described. Note: option to add 2005 Yamaha 8 hp kicker, and Minn Kota Terrova Blue tooth 80Lb 24 v 60" shaft trolling motor at additional cost. Open to reasonable offers, Boat in good condition with normal dock rash. Contact info- [email protected] or 585-406-5764
  4. Big sheepshead, catfish or laker would be interesting too. How would you net on a 2 or 3 foot lead? I see more minus than positives with this program. Could be a good way to stuff a downrigger cable into a prop-things get real interesting when that happens.
  5. No cleaning station in Barcelona due to lack of sewer system at the harbor. Was studied when new grinders were done at Hanover and Dunkirk in last couple years.
  6. Getting fish in both basins. Some real nice fish this year. On 6/28 had 7 quality eyes with two at 24". Weed lines with crawler harness's
  7. Mid to late July, Dunkirk would a good spot to work from. Lots of places to stay and you can launch from Dunkirk or Cattaraugus Creek. Can work a variety of depths. Should be plenty of walleyes available especially “eater” size, getting a 10lb one you’ll likely sort through a few to find one. Should be able to get fish from boards with leadcore, divers and riggers.
  8. With warmer water, the daytime walleye bite has been pretty good along and in the weeds. Some pics from some recent trips.
  9. Eastern Lake Erie Charter Boat Association continues to attract new member Captains and Mates. We have close to 70 current paid members and membership information is available on our website. We have member Captains working New York waters of Lake Erie, upper/lower Niagara River, and western Lake Ontario. ELECBA offers required drug testing and the opportunity to promote our fishery. Contact any officer for additional information or attend one of our meetings!
  10. In the past when I’ve fished off Cleveland it was an open water bite and by mid July likely offshore. Think planer boards, divers approach would be more productive than jigging as the fish are relating more to bait than structure. You could fish NY water off Dunkirk or the Catt to try Erie fishing before heading west.
  11. Misdirection is right on. Big boards easier when you have different people on board. Bigger boats have room to store boards, mast, planer reels. For smaller boats with less storage, in lines are a better option. Both are very effective and what works for your crew and your boat is the best choice.
  12. Posting edited 2/28/21 to show Price with shipping to domestic US for both groups.
  13. Charter Boat Captains if you are interested in joining an organization that offers drug testing plus other group benefits, consider Easter Lake Erie Charter Boat Association. Now is the time to sign up and it is easy to do. Links to ELECBA website right from LEU and website has links to membership forms along with benefits of membership. If you have questions just use the contact link and one of our officers will get back with you. After doubling in size in 2020, ELECBA is looking to continue to grow for 2021. Our current membership has Captains fishing Eastern Lake Erie, Niagara River, and Western Lake Ontario. Looking forward to hearing from you! Capt Frank Schoenacker/Infinity Charters- Treasurer ELECBA
  14. Tough Mate Double Bow Case with wheels and 4 Master locks. Used on Western Elk hunts-never any damage to bows. Heavy Duty- some wear from handling - good condition. Held 2 bows, arrows, releases and other gear. Dimensions outside are- 47" long x 18" wide x 7" deep. Price $200 or Best Offer. Local Pickup only due to size and weight- will drive 1/2 hour any direction to meet for pickup.
  15. Acquired some Okuma Blue Diamond Downrigger rods that needed some repair in a tackle swap this winter. Rods needed some guides and tips replaced because of missing inserts or guides just retied. Rods have been repaired with guides replaced, retied, and coated with flex coat rod guide epoxy. Replaced guides have Pac Bay hialoy double foot guides in correct sizes. Rods weren't broken just matter of issue with guides. After repairs would rate condition as "good useable condition". Will provide more photo's if requested. Price as follows : Group 1- Pair of BD-C-862M-1 8"6" Line 12-25 lb Medium action Rigger Rods 2 piece rods. Price $30.00 each or $50.00 for matched pair Local Pickup - With USPS Domestic Shipping for pair$65.00 Repairs were 0ne guide on butt section of each and one tip replacement. Group 2- one BD-C-762 ML-1 7'6" Line 8 to 20 lb Medium Light action Rigger rod 2 piece rod. Repairs were one upper guide replaced and one upper guide retied along with new tip. one BD-C-862 ML-1 8'6" Line 10 to 20lb Medium Light action Rigger rod 2 piece rod. Note this rod measures closer to 8" 1". Repairs were 3 upper guides replaced. one BD-C-862-MLa 8'6" Line 10-20lb Medium Light action Rigger rod 2 piece rod. Believe this rod is an earlier version w/different butt and wrappings. Repairs were one guide retied and tip replaced. Price for Group 2 rods- $25.00 each or all three for $60.00 Local Pickup - With USPS Domestic Shipping all three for $75.00 NOTE- LOCAL PICKUP FROM CHAUTAUQUA OR DUNKIRK AREA. NOTE - WITH USPS SHIPPING OPTION NO RETURNS/REFUNDS
  16. 2002 Yamaha 9.9 Model F9.9MLHB four stroke- long shaft, manual start, manual tilt, and 6 amp alternator with Trollmaster Pro 2 throttle control. Includes tank and hose. Runs good- original owner looking to upgrade to kicker with more features. Local pickup only- Price $1200 Located in Ashville, NY ( Chautauqua area )
  17. I’ve run them inside of lead core no problem. Also set them on boards over slide divers no problem. Couple years ago I was running three short coppers on one side and ran into a school of junk fish- they wadded up all three lines- real big mess. To me, it works but lead core easier to deal with.
  18. Running 250 walleye blood run copper on Daiwa 57 LC - figure it gets down around 60 foot. Like how that fishes compared to some shorter coppers I have played with.
  19. More weight and farther back. In line boards to get lines away from boat. Longer leads and wider spreads on Lake Erie. 5 color lead pretty versatile and your 2 oz weights on that would probably get you down to the fish that a 10 is taking. Dipseys deadly on deep eyes too.
  20. Lots of ways to handle leader to dipsy and it is more about personal preference rather than right or wrong. Using two snaps or a snap swivel with a snap both work. Direct tie OK too.Use fluorocarbon leader. Most of the time you can run same length for plugs and spoons. Crawler harness on a long lead might require short leader. I keep my leaders on a Amish Outfitters leader roll. If you are spinning up leaders might be from deploying dipsy too fast or a unnoticed trash fish spinning it up.
  21. Go to Trollmaster website and you can download the TM208 manual which should be for Evinrude, Johnson,Suzuki installation. I have a Trollmaster 2 on a Yamaha was a pretty simply installation and it has worked well for years only had to replace one part.
  22. Slide Diver standard weight is 4 oz. They offer a heavy weight kit which is a 7 oz weight and a big ring. I’ve never fished deeper diver but likely the deeper diver would compare closer to a SD with heavy weight kit. IMO the slide diver dive curve is slightly less than a LJ dipsey which I’ve fished a lot. I just run more line with SD and compensate that way. To me printed dive curves are a starting point and I let the fish and my rods tell me the numbers I need to run.
  23. This is how I setup a Slide Diver Lite Bite- 1. Diver comes with a piece of clear tubing. Feed a short piece of tubing over the end of the rear trigger loop to close gap. This keeps your line in the trigger loop and makes deploying easier. See picture for detail. 2. Put a piece of supplied surgical tubing over front trigger then slide on spring tube section. 3. For braid diver I tie in 40ft. of Maxima Ultragreen 40lb test Mono Leader material ( 30 or 35 ft works too). Can also substitute 30 or 40lb test Big Game mono. I like the 40lb leader as it holds up longer before it needs to be swapped out. I use a back to back uni knot to tie mono to the braid. For a wire diver use an Albright knot to attach 65lb braid to wire then use back to back uni knot to attach mono for slide material. 4. Feed the mono through diver add a piece of surgical tube under front trigger to lock mono before trigger is set. 5. Put a bead on the end of mono to help cushion knot when diver slides back. Tie on a quality snap swivel. 6. Adjust triggers- front trigger should be fairly tight and rear trigger fairly loose. Back trigger adjustment is pretty sensitive. Once you do a few it gets easier. 7. Tie a 3 or 4 ft fluorocarbon leader -I use 20lb test- with a barrel swivel on one end and a plain snap on the other end for your lure to attach to. This leader keeps diver from sliding down to the fish. Make it long enough but short enough for comfortable netting. You can rig a standard slide diver in same manner-just no rear trigger. With the mono slide leader no snubber required. This setup works on Lake Erie or Lake Ontario (use 30lb leader section for flasher fly or meat rig). I also use rings as I like my diver rods to load up so I get a solid release. Pictures attached. Hope this is helpful. The regular Luhr Jensen dipsey works great, I just think the slide diver with adjustable leader length is better.
  24. Let me get some pics and I will post in “tackle and technique” section - hopefully later today.
  25. J Sparrow if you decide to try slide divers PM me and I’ll pass along some setup tips that can shorten the learning curve on SD’s.
×
×
  • Create New...