Jump to content
Search In
  • More options...
Find results that contain...
Find results in...

afastainlesskb

Members
  • Content Count

    4
  • Joined

  • Last visited

Community Reputation

0 Neutral
  1. The phenomenon of water leakage in faucets is not uncommon. It can be said that it is often encountered. How to solve this problem? Let's take the example of stainless steel faucets to share the solution. 1. The gap in the faucet junction is leaking. It may be that the contact is not tightened. Try the screw. 2. If the water outlet of the faucet leaks, it may be that the water stop tape is damaged. Use the lifting pliers to remove the faucet and re-roll a new water-stopping tape where the screws are fixed. 3. If the sealing ring of the faucet is broken, it will cause water leakage. You need to replace the new sealing ring and use a wrench to unscrew the packing nut. The seal is an "O" shaped rubber sheet, and some are a string or wire wound around the spool under the packing nut. If it is broken, take it down and replace it with a new one. Then tighten the nut. It is better to apply a little Vaseline oil to the thread and nut of the valve plug before screwing the nut. 4. The damage of the shaft gasket inside the faucet will also cause water leakage. Remove the gland of the faucet and use the clip to take out the worn shaft gasket and replace it with a new one. 5. If the valve seat is broken, the water tap and the surface of the table will leak. Of course, you can choose to replace the whole faucet, or you can change only one seat. It is easy to remove the valve seat. It can be done with a wrench. If it is not removed, insert a seat cover that slides into the proper position of the old seat and provides a seal. Two types of seat roller compactors or sanders that can re-flat the worn seat. Remove the valve plug to use the sander, turn it clockwise a few times with the appropriate force, and wipe off the metal scrap that has fallen off. information about stainless steel faucets : https://www.afastainlesskb.com/product/stainless-steel-faucets/
  2. When the stainless steel faucet has stains, how to deal with it properly, let's introduce the following kitchen faucets manufacturers . First find a clean towel. Wrap the towel over the faucet. Need to find a towel that is not too thick or a towel that is too thin, it is not convenient when actually dealing with stains. The second is to pour white vinegar on the towel wrapped in the faucet. It can be a white vinegar for consumption at home. Its function is to soften the stain on the faucet, and it will not directly conflict with the stainless steel material. Then wrap the towel with white vinegar on the faucet and let it sit for five minutes. When it is time, take off the white vinegar towel. At this point, it will feel that the white vinegar has been fully distributed on the faucet. Finally, use a toothbrush to clean the faucet on the faucet so that the faucet is clean. This method is simple and convenient, I hope you can learn it. information about kitchen faucets manufacturers : https://www.afastainlesskb.com/product/stainless-steel-faucet/kitchen-faucet/
  3. The easy place for the faucet is the valve core, so it is necessary to master its replacement skills. Once the faucet leaks, it will not only waste water resources, its water droplets and long-term effects on the humidity of the space will be healthy for the family. Then when there is a problem with the faucet spool, how do you change the faucet spool? The following kitchen faucets manufacturers will teach you how to replace it: 1. Close the total water valve first. 2. Then put a red and blue mark of about 8 mm on the handle of the faucet and buckle it down. 3. Use a flat-blade screwdriver to loosen the set screw counterclockwise and remove the handle to expose the spool. 4. Use a spanner wrench to disassemble the valve core of the faucet, open the upper part of the gland with a wrench, and remove the ceramic valve inside. Faucet spool replacement notes: 1. After removing the spool, you will see a blue rubber band on the bottom of the spool. It is customary to have a red eraser at the bottom of the left spool and a blue eraser on the right. 2, so when changing the right spool, use the blue rubber valve core, after the valve core is installed, the handle is inserted, adjust the direction of the hand wheel, the handle is closed to the water when the two sides are closed, the direction of the person standing is boiling water . 3. Install the screw and cover the blue cap on the right side, so that the new valve plug is replaced. information about kitchen faucets manufacturers : https://www.afastainlesskb.com/product/stainless-steel-faucet/kitchen-faucet/
  4. Below, kitchen faucets manufacturers to teach you how to clean the stainless steel sink: 1. Roll the used plastic wrap into a mass and use it to wipe the inner wall of the pool to make the pool bright and clean. 2. Roll the plastic bag of packaged fruit into a ball, use it to wipe the pool, and put some detergent on the stained area to make the pool clean and new. 3. Soak the damp cloth in the beer, then use it to wipe the pool, you can receive a bright and clean effect. 4. The stainless steel sink has been used for a long time, and there are spots on the surface. This is because we have not thoroughly cleaned it, causing some deposits to be moldy. When this happens, don't worry, you need to scrub with talcum powder or detergent. information about kitchen faucets manufacturers : https://www.afastainlesskb.com/product/stainless-steel-faucet/kitchen-faucet/
×
×
  • Create New...